WD6200-IR Fixed Gas Detector is designed for detecting methane (CH4). It features a double beam IR sensor that effectively reduce the zero drift to the minimum, and extends the maintenance intervals. The detector enjoys better gas selectivity, stability, longer life span, and wider application over detector with regular IR sensor. It shows not only the concentration of gas but also diagnostic result of the unit itself through the LCD screen and can be connected to the control panel with a standard 4-20mA analog communication.
WD6200-IR Fixed Gas Detector
Description
Features
Double beam infrared technology, good stability
High accuracy, longer lifespan
4-20mA signal output
3 relay output for low alarm, high alarm and fault alert
LCD display, easy to read
Remote controller for setting, easy operation
Special installation accessories, easy installation
Smart sensor module design, easy maintenance
Sensor with heating function, excellent moisture and heat resistance
Application
Oil and gas industry
Specifications
| Measuring gas | Methane (CH4) | |||
| Measuring range | 0-100%LEL | |||
| Measuring range | ≤3%LEL | |||
| Sensor life | ≥5 years | |||
| Measuring type | Diffuse naturally | |||
| Response time | ≤10s | |||
| Signal output | 4-20mA | |||
| Alarm output signal | 3 programmable relays | |||
| Cable / distance | 1.5 MM2, 3 wire, shielded,1000m (maximum) | |||
| Conduit connection | G3/4” | |||
| Mounting type | Wall mounted | |||
| Working temperature | -40℃～+70℃ | |||
| Working humidity | <95%RH (no condensation) | |||
| Operation voltage | DC24V±25% | |||
| Consumption | <7.5W | |||
| Ingress Protection | IP66 | |||
| Housing material |
Chamber: Aluminum alloy Sensor cover: Stainless steel |
|||
| Dimension and weight | 276×263×108mm, about 3.8kg | |||
| Explosive proof | Ex d IIC T6 | |||
Info Request
For all inquiries, please fill in the form below(* are required) to send us a brief message, and we will get back to you as soon as possible.
