CP01 is a fixed gas detector installed in a place where potential gas hazard exists to measure oxygen, toxic gas and combustible gas. It is suitable for non- explosive environment use. It communicates with the control panel through 4-20mA analog output or RS485 digital signal.
CP01 Fixed Gas Detector
Description
Features
Water and dust proof
2 relay output for 4-20mA type
Economical type with stable performance
Small size, easy to install
Application
Hospitals, restaurants, hotels, car parks, refrigeration industry or industrial areas where explosion protection is not required.
Specifications
| Measuring gas | O2 | CO | H2S | Combustible |
| Measuring range | 0-25%VOL | 0-500ppm | 0-100ppm | 0-100%LEL |
| Sensor type | Electrochemical | Electrochemical | Electrochemical | Catalytic |
| Resolution | 0.1%VOL | 1ppm | 1ppm | 1%LEL |
| Sensor life | 1 year | 2 years | 2 years | 2 years |
| Measuring type | Diffuse naturally | |||
| Response time | Toxic gas and O2: T90≤60s Combustible: T90≤30s | |||
| Signal output | 4-20mA / RS485 | |||
| Alarm output signal | 2 programmable relays for 4~20mA type | |||
| Cable / distance |
4-20mA type: 1.5 MM2, 3 wire, shielded,1000m (maximum) RS485 type: 1.5 MM2, 4 wire, shielded, 1000m (maximum) |
|||
| Mounting type | Wall mounted | |||
| Working temperature | Toxic gas: -20℃～+50℃ Combustible: -40℃～+70℃ | |||
| Working humidity | <95%RH (no condensation) | |||
| Operation voltage | DC24V±25% | |||
| Consumption | <2W | |||
| Ingress Protection | IP66 | |||
| Housing material | Plastics | |||
| Dimension and weight | 165×118×62mm, about 0.5kg | |||
| Approval | CE | |||
Info Request
For all inquiries, please fill in the form below(* are required) to send us a brief message, and we will get back to you as soon as possible.
